The default login screen is running a loop message.
If you need to login the E-Detective, please press alt+F2 to change other screen.



E-Detective System default IP is 192.168.1.60 and default gateway is 192.168.1.1. If that need to be changed, we provide you two ways to configure default setting.

---

Note: Local configuration means you should directly connect monitor and keyboard to the machine.

---

Input user ID and password “dec / jmyohxbc” to login. Type instruction “SetIP”.
Then, it will display as following.

If you use “Bridge Mode”, please type “y” or ignore this section to next one beginning with ●.


Assign number to first NIC of brige - eth0 for example.
 

Assign number to second NIC of bridge – eth1 for example.
 

Input “br0”
 

Input IP of br0
 

Please answer the followings in order. System will display network information - IP address, netmask and broadcast. Please confirm carefully. If the settings are correct, please input “y” to continue.
 

Please input “n” to reject.
 

Please input gateway


If the settings are correct, please input “y” to continue.


Select a NIC to get data - br0 for example.
 

Setting NFS’s device
    


Finished. System will reboot automatically.
 


 ● If you do not use “Bridge mode”, please input “n”.
 


Please choose a NIC device for management - eth0 for example.
 


Input IP address.
 


Please answer the followings in order. System will display network information - IP address, netmask and broadcast. Please confirm carefully. If the settings are correct, please input “y” to continue.
 


Please input “n” to reject.
 


Please input gateway



If the settings are correct, please input “y” to continue.
    


Select a NIC to get data - br0 for example.
 


Setting NFS’s device



Finished. System will reboot automatically.